This is the basic first step of learning how to do simple blinking LED.
Introducting Buzzer as an output and connecting an input (Button) to control the output
The mechanical movment is an important part in designing a system, thus, understanding the Servo motor is highly recommended
To build a car or a boat its very important to understand how to run and DC motor. You might what to build a fan, airplane or just a moving robot.
If you what to control the electricity in your room or control home appliances it time to work with the RELAY, but be careful of electricity
Using the LCD to display information is very helpful when you are designing a system
Colors are beautiful, using the RGB will add an amazing artistic touch and can be very useful
The infrared sensors can detect objects from distance and can distinguish between black and white
Buttons are important input device that used a lot in devices and can have many functions
Light sensor can help you to tell the difference between lightness and darkness. You can use it for many gadgets and ideas.
Temperature sensor is very important when it comes to understanding and determining the environment around us. It can be used as safety sensor too.
Ultrasonic is distance measuring sensor with output in centimetres (cm). Its can be used for many object detection and sonar scanning.
Potentiometer it a simple variable resistor that changes its value when rotated. It can be used for sensing mechanical movement to electronic signals.
Advance uses of DC motors: you can open and change the gears ratio in DC motor to get more speed or more torque. You can also control.the speed by adding a variable to the DC motor programing node.
Bluetooth is way of communication that is very helpful and available in all smart phones. You can use the bluetooth module to control you Ebot board wirelessly or get feedback from sensors.
playing media is useful when you are building and attractive design. In this example we will cover how to play images on the Ebot software on specific event.
Outputs direct control can be very useful to setup complex machine movements. You can test any output and save a series of movement to be repeated.